Research Article | | Peer-Reviewed

Assessment for Replacing Coal and Petroleum Product with Green Hydrogen for Steel and Iron Production

Received: 30 December 2023     Accepted: 26 January 2024     Published: 20 February 2024
Views:       Downloads:
Abstract

Among the leading global contributors to anthropogenic CO2 emissions, the iron and steel industries are energy-intensive sectors. This is due to the fact that fuel and iron ore are reduced using non-renewable energy sources like coal and charcoal. A tonne of iron is produced, and that produces roughly 1.9 tonnes of CO2 gas. It is necessary to switch to clean energy sources from conventional carbon-emitting sources in order to lower emissions from the iron and steel industry. Hydrogen is a substitute fuel that has the potential to replace carbon-emitting fuel in the iron and steel sectors, according to the present trend in clean energy development. Hydrogen can be employed as a reducing agent in blast furnaces as an auxiliary or as the only reducing agent in the direct reduction process, which is how iron and steel are produced. Water is the only byproduct of the electrolysis process, which creates green hydrogen using renewable energy sources. In the iron industry, using green hydrogen can lower intensive carbon emissions. Green steel or iron production costs can be competitive and less carbon intensive if the cost of producing green hydrogen is low. In this paper, the steel and iron production from green hydrogen is studied to contribute to developing the conceptual design along with challenges for handling the hydrogen in these industries and compared with the conventional carbon-based process. In addition, the economic assessment for the production of steel from a green hydrogen-based process.

Published in American Journal of Modern Energy (Volume 10, Issue 1)
DOI 10.11648/j.ajme.20241001.11
Page(s) 1-10
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Blast Furnaces, Direct Reduction Method, Green Hydrogen

References
[1] L. F. R. Camargo, L. H. Rodrigues, D. P. Lacerda, and F. S. Piran, “A method for integrated process simulation in the mining industry,” Eur. J. Oper. Res., vol. 264, no. 3, pp. 1116–1129, Feb. 2018, https://doi.org/10.1016/J.EJOR.2017.07.013
[2] “Mineral Resources of Nepal and their present status – Nepal Geological Society.” https://ngs.org.np/mineral-resources-of-nepal-and-their-present-status/ (accessed Nov. 27, 2021).
[3] “ENGIE Joins Mining3 to Accelerate Mining Industry Decarbonization by Co-Creating Hydrogen Solutions | ENGIE.” https://www.engie.com/en/mining3-decarbonization-mining-industry (accessed Nov. 27, 2021).
[4] “Green hydrogen key to decarbonising mining – report - MINING.COM.” https://www.mining.com/green-hydrogen-key-to-decarbonising-mining-report/ (accessed Nov. 27, 2021).
[5] M. H. Joulazadeh and A. Etemad, “Evaluation of the production of DRI in the world and Iran in 2021,” vol. 19, no. 1, pp. 55–66, 2022.
[6] M. L. Brusseau, G. B. Famisan, and J. F. Artiola, “Chemical Contaminants,” Environ. Monit. Charact., pp. 299–312, Jun. 2004, https://doi.org/10.1016/B978-012064477-3/50018-7
[7] Metso: Outotec, “Chapter 3 - Size Reduction,” Basics Miner. Process. (12th Ed.), pp. 53–59, 2022.”
[8] “iron processing - Ores | Britannica.” https://www.britannica.com/technology/iron-processing/Ores (accessed Nov. 27, 2021).
[9] W. Liu, H. Zuo, J. Wang, Q. Xue, B. Ren, and F. Yang, “The production and application of hydrogen in steel industry,” International Journal of Hydrogen Energy, vol. 46, no. 17. Elsevier Ltd, pp. 10548–10569, Mar. 08, 2021, https://doi.org/10.1016/j.ijhydene.2020.12.123
[10] “SGS MINERALS SERVICES-T3 SGS 960,” 2009, Accessed: May 06, 2022. [Online]. Available: www.sgs.com/mining.
[11] “Haldar, S. K. (2018) Mineral Exploration Principles and Applications. 2nd Edition, Elsevier, Amsterdam, 378. - References - Scientific Research Publishing.” https://www.scirp.org/reference/referencespapers?referenceid=2908708
[12] “Extraction of Iron: Meaning, Purification, & Extraction Methods.” https://testbook.com/learn/chemistry-extraction-of-iron/ (accessed Nov. 28, 2021).
[13] “Introduction to Iron ore Pellets and Pelletizing processes – IspatGuru.” https://www.ispatguru.com/iron-ore-pellets-and-pelletizing-processes/ (accessed Nov. 27, 2021).
[14] Z. Fan and S. J. Friedmann, “Low-carbon production of iron and steel: Technology options, economic assessment, and policy,” Joule, vol. 5, no. 4, pp. 829–862, Apr. 2021, https://doi.org/10.1016/J.JOULE.2021.02.018
[15] “The Iron Blast Furnace: Theory and Practice - J. G. Peacey, W. G. Davenport - Google Books.” https://books.google.com.np/books?hl=en&lr=&id=43-cDAAAQBAJ&oi=fnd&pg=PP1&dq=blast+furnace&ots=LvzD7PeLy_&sig=VApglX9pch7l0gpv4e96vKcIXHY&redir_esc=y#v=onepage&q&f=false (accessed Apr. 11, 2022).
[16] J. M. Smith, H. C. Van Ness, M. M. Abbot, and M. T.. Swihart, Introduction to Chemical Engineering Thermodynamics Eight Edition. 2018.
[17] “IOP Conference Series: Earth and Environmental Science Comparison between hydrogen production by alkaline water electrolysis and hydrogen production by PEM electrolysis,” https://doi.org/10.1088/1755-1315/371/4/042022
[18] “Huge iron ore reserves found in Nawalparasi.” https://kathmandupost.com/money/2016/03/17/huge-iron-ore-reserves-found-in-nawalparasi (accessed Nov. 18, 2021).
[19] C. H. Swanson, Basic Principles and Calculations in Chemical Engineering, vol. 29, no. 8. 1974.
[20] J. Koirala and S. Acharya, “Overall Scenario of Iron and Steel Industry in Nepal,” SSRN Electron. J., Aug. 2020, https://doi.org/10.2139/SSRN.3649292
[21] “Nepal’s largest iron ore reserves found in Nawalparasi.” https://kathmandupost.com/national/2016/03/16/nepals-largest-iron-ore-reserves-found-in-nawalparasi (accessed Dec. 16, 2021).
[22] “Nepal Imports of Iron and steel - 2021 Data 2022 Forecast 1994-2019 Historical.” https://tradingeconomics.com/nepal/imports/iron-steel (accessed Nov. 29, 2021).
[23] “Climate change and resilient food systems,” Google Books. https://books.google.com.np/books?id=7PYZEAAAQBAJ&printsec=copyright&redir_esc=y#v=onepage&q&f=false
Cite This Article
  • APA Style

    Bhandari, S., Shakya, N., Bhattarai, S., Thapa, B. S. (2024). Assessment for Replacing Coal and Petroleum Product with Green Hydrogen for Steel and Iron Production. American Journal of Modern Energy, 10(1), 1-10. https://doi.org/10.11648/j.ajme.20241001.11

    Copy | Download

    ACS Style

    Bhandari, S.; Shakya, N.; Bhattarai, S.; Thapa, B. S. Assessment for Replacing Coal and Petroleum Product with Green Hydrogen for Steel and Iron Production. Am. J. Mod. Energy 2024, 10(1), 1-10. doi: 10.11648/j.ajme.20241001.11

    Copy | Download

    AMA Style

    Bhandari S, Shakya N, Bhattarai S, Thapa BS. Assessment for Replacing Coal and Petroleum Product with Green Hydrogen for Steel and Iron Production. Am J Mod Energy. 2024;10(1):1-10. doi: 10.11648/j.ajme.20241001.11

    Copy | Download

  • @article{10.11648/j.ajme.20241001.11,
      author = {Sangam Bhandari and Nashla Shakya and Sabin Bhattarai and Biraj Singh Thapa},
      title = {Assessment for Replacing Coal and Petroleum Product with Green Hydrogen for Steel and Iron Production},
      journal = {American Journal of Modern Energy},
      volume = {10},
      number = {1},
      pages = {1-10},
      doi = {10.11648/j.ajme.20241001.11},
      url = {https://doi.org/10.11648/j.ajme.20241001.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajme.20241001.11},
      abstract = {Among the leading global contributors to anthropogenic CO2 emissions, the iron and steel industries are energy-intensive sectors. This is due to the fact that fuel and iron ore are reduced using non-renewable energy sources like coal and charcoal. A tonne of iron is produced, and that produces roughly 1.9 tonnes of CO2 gas. It is necessary to switch to clean energy sources from conventional carbon-emitting sources in order to lower emissions from the iron and steel industry. Hydrogen is a substitute fuel that has the potential to replace carbon-emitting fuel in the iron and steel sectors, according to the present trend in clean energy development. Hydrogen can be employed as a reducing agent in blast furnaces as an auxiliary or as the only reducing agent in the direct reduction process, which is how iron and steel are produced. Water is the only byproduct of the electrolysis process, which creates green hydrogen using renewable energy sources. In the iron industry, using green hydrogen can lower intensive carbon emissions. Green steel or iron production costs can be competitive and less carbon intensive if the cost of producing green hydrogen is low. In this paper, the steel and iron production from green hydrogen is studied to contribute to developing the conceptual design along with challenges for handling the hydrogen in these industries and compared with the conventional carbon-based process. In addition, the economic assessment for the production of steel from a green hydrogen-based process.
    },
     year = {2024}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Assessment for Replacing Coal and Petroleum Product with Green Hydrogen for Steel and Iron Production
    AU  - Sangam Bhandari
    AU  - Nashla Shakya
    AU  - Sabin Bhattarai
    AU  - Biraj Singh Thapa
    Y1  - 2024/02/20
    PY  - 2024
    N1  - https://doi.org/10.11648/j.ajme.20241001.11
    DO  - 10.11648/j.ajme.20241001.11
    T2  - American Journal of Modern Energy
    JF  - American Journal of Modern Energy
    JO  - American Journal of Modern Energy
    SP  - 1
    EP  - 10
    PB  - Science Publishing Group
    SN  - 2575-3797
    UR  - https://doi.org/10.11648/j.ajme.20241001.11
    AB  - Among the leading global contributors to anthropogenic CO2 emissions, the iron and steel industries are energy-intensive sectors. This is due to the fact that fuel and iron ore are reduced using non-renewable energy sources like coal and charcoal. A tonne of iron is produced, and that produces roughly 1.9 tonnes of CO2 gas. It is necessary to switch to clean energy sources from conventional carbon-emitting sources in order to lower emissions from the iron and steel industry. Hydrogen is a substitute fuel that has the potential to replace carbon-emitting fuel in the iron and steel sectors, according to the present trend in clean energy development. Hydrogen can be employed as a reducing agent in blast furnaces as an auxiliary or as the only reducing agent in the direct reduction process, which is how iron and steel are produced. Water is the only byproduct of the electrolysis process, which creates green hydrogen using renewable energy sources. In the iron industry, using green hydrogen can lower intensive carbon emissions. Green steel or iron production costs can be competitive and less carbon intensive if the cost of producing green hydrogen is low. In this paper, the steel and iron production from green hydrogen is studied to contribute to developing the conceptual design along with challenges for handling the hydrogen in these industries and compared with the conventional carbon-based process. In addition, the economic assessment for the production of steel from a green hydrogen-based process.
    
    VL  - 10
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Mechanical Engineering, Kathmandu University, Dhulikhel, Nepal

  • Department of Mechanical Engineering, Kathmandu University, Dhulikhel, Nepal

  • Department of Mechanical Engineering, Kathmandu University, Dhulikhel, Nepal

  • Department of Mechanical Engineering, Kathmandu University, Dhulikhel, Nepal

  • Sections